Darkside BMW 3.0 Diesel 335d / X3 / X5 EGR & EGR Cooler Delete Kit
This kit replaces the EGR Valve and fits neatly between the Anti Shudder Valve and Inlet Manifold. Retaining the ASV means the engine still remains smooth when switching off the ignition
This EGR Delete Kit is machined from a Single Billet so there are no welds. This improves appearance and also strength. Kits from other suppliers crack due to the strain of the boost pipework hanging from the ASV, so Darkside have designed this item to overcome this problem
The unique Grub Screw design allows for the neatest possible install, removing the bulky brass fitting found on other EGR Delete Kits. The tiny hole also eliminates the need to fit an 'in-line' reducer to stop the boost guage from fluttering under heavy load. The design also means that customers who will not be using the boost takeoff will have a clean looking install as the design is almost exactly the same profile as the standard EGR Valve, which allows all the stock fixings to be used
Reduces Inlet Air Temperatures = More Power
Prevents Inlet and Turbo from Clogging up
Brushed Aluminium Finish
Made in the UK
This kit replaces the EGR Valve and fits neatly between the Anti Shudder Valve and Inlet Manifold. Retaining the ASV means the engine still remains smooth when switching off the ignition
This EGR Delete Kit is machined from a Single Billet so there are no welds. This improves appearance and also strength. Kits from other suppliers crack due to the strain of the boost pipework hanging from the ASV, so Darkside have designed this item to overcome this problem
The unique Grub Screw design allows for the neatest possible install, removing the bulky brass fitting found on other EGR Delete Kits. The tiny hole also eliminates the need to fit an 'in-line' reducer to stop the boost guage from fluttering under heavy load. The design also means that customers who will not be using the boost takeoff will have a clean looking install as the design is almost exactly the same profile as the standard EGR Valve, which allows all the stock fixings to be used
PLEASE NOTE: ONCE THE VALVE IS EITHER REMOVED OR BLANKED OFF THE VEHICLES ECU WILL NO LONGER GET A SIGNAL FROM THE EGR VALVE CAUSING THE EMMISIONS WORKSHOP LIGHT TO APPEAR ON THE DASH BOARD. THIS CAN BE REMOVED BY REPROGRAMMING THE EGR SOFTWARE ON THE ECU.
This Kit Consists of:
Darkside Developments Double Flange Race Pipe
Machined Blank Cap
7x M6 Bolts
Vented Grub Screw (Boost Guage Takeoff)
Grub Screw (To Block Boost Port)
3x Cooler Pipe Blanks
EGR Blank with Gasket
Series / Chassis:
E70 / E70N / E83 / E83N / E90N / E91N / E92N