MG Flasher is a mobile application developed to provide OBD tuning capability of BMW Fxx/Gxx series equipped with Gen 1 & 2 B46, B48 or B58 engines. MG Flasher has been prepared for Android and iOS users. The tuning process is simple; download the App, connect ENET Wi-Fi adapter or ENET cable and flash any of our offered OTS maps to meet your specific vehicle’s needs! Map flashing time is 15 - 20 seconds!
MG Flasher is a mobile App to tune your BMW equipped with Gen 1 & 2 B46, B48 or B58 engine by OBD using ENET Wi-Fi adapter or ENET cable. Flashing time on ENET is only 15 - 20 seconds!*
*Initial flash/ECU unlock with ENET will take approximately 4 - 6 minutes.
Up to 420 hp and 600 Nm (438 lb-ft) at the crank!
Cars with stock exhaust system
Up to 410 hp and 580 Nm (428 lb-ft) at the crank!
Cars equipped with Otto Particulate Filter (OPF)
(550 Nm limit without 8HP50 Transmission flash)
*Transmission Tuning Recommended*
See Transmission Limiter information below
OTS Maps Bundle - It is the most convenient and economical all-in-one package. All available OTS maps (Stage 1, Stage 2, Stage 3) included for your car with the same VIN number - choose it and have no more hassle of upgrade costs in the future! This package will allow you to switch between maps of your choice!
Ultimate Package - It is the most convenient and economical all-in-one package which unlocks access to flasher, logger and let you flash all available OTS maps (Stage 1, Stage 2, Stage 3) included for your car with the same VIN number - choose it and have no more hassle of upgrade costs in the future! This package will allow you to switch between maps of your choice!
Logger License - Use our Logger to log real-time data from your ecu and plot it into graphs (using our MG Cloud online graphing tool) for troubleshooting and optimizing your MG1 ECU. You can select from a wide range of items to monitor including RPM, boost pressure, air-to-fuel ratio and many more. You can select the units with which you would like to record. If that wasn't enough, advanced users and Tuners may access expert mode that allows you to enter specific RAM addresses to log.
Flasher Licence - This license allows unlimited flashing of the assigned vehicle (VIN locked) with MG1 ECU. It also enables Diagnostic Module and Custom Flash option with all additional options included (if available) at no additional cost.
In order to flash any OTS or Custom Maps, a Flashing License is required.
Flashing License purchase will allow you to use following MG Flasher functions:
Switchable Maps On-The-Fly - WORLD'S FIRST SOLUTION FOR BMW B58/B48 - through a simple combination of the Brake Pedal, Accelerator Pedal, Traction Control Button and the Driver Select Switch you can quickly select between mapping, without the need to reflash vehicle! Support for HPFP included! G series video
Hybrids and Gen 2 switchable maps, including all ethanol maps, are under development.
Ethanol Blends (up to E30) are built into our OTS maps and available using Switchable Maps (on select vehicles only)
Dynamic Exhaust Burble On-The-Fly - via a simple combination of the Driving Experience Switch and the MSA button you can change the intensity of the burbles whenever you like! Here's how!
MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
Max Cooling On-The-Fly - With a simple button combination sequence, you can enable the option without reflashing the car! Youtube Video.
MG Flasher offers Hybrids and Gen 2 adjustable options during flash; On-The-Fly features are under development.
Torque Limit Adjustability - TCU 8HP Limiter Lifted for Gen 2 B48 and B58 platforms! Software calibration without the need for any transmission tuning or skewing the torque/load calculation model maps. This allows for accurate calculations, smooth shifting and no software trickery.
Speed limit removal
Cold start with CAT heating delete (racing/off-road use only)
HP gauge and TQ gauge calibrated according to the power level (available with each OTS map)
Custom flashing – flash custom maps prepared by us or other tuners/users
OTS maps/ All OTS pack (subject to additional cost)
Logger - log real time data and plot it into graphs for troubleshooting and optimizing (subject to additional cost $99)
Diagnostic- Read and clear BMW specific DTC's
Reset various adaptations, restore coding
CVN number (Checksum Verification Number) along with flashing counter stays untouched. This means our software will be virtually invisible to dealer level diagnostic tools
ALL future updates to the tune are FREE of cost. If we introduce a newer version, you won’t have to pay anything to get the upgrade